Mr Rabbit for my Dear Father

Hello and welcome, 

I have made this card for my dear Father’s birthday. I think Mr Rabbit from Tim Holtz is the perfect stamp for a masculine card. He is adorable. I used Tim Holtz products for this card. 

I started with the background, a piece of Kraftstock, stamped the plaid image from CMS478 Mr Rabbit with Ground espresso Archival ink. Then I ripped a piece of Collage paper - Palette and adhered to the background with Collage Medium matte. Then I used my sewing machine and stitched the edges. 

Then I started to make the stars, cut them out from Mixed media heavy with Sizzix 666567 Vault rosettes die. Inked them with Scorched timber Distress ink. 

I cut a piece of denim from a pair of old jeans, and again ripped a piece of Collage paper - Palette, adhered to the denim with Collage medium. I ripped som threads from the edges of the denim as well and stitched a zigzag seam to the left of the denim piece. I used some glue, long fasteners and my tiny attacher to adhere the fabric to the background. 

I used a small piece from a Ideaology Stencil card in the right corner. I inked it a little with Scorched timber and inked the edges with Uncharted mariner DI. I also inked the edges on some Ephemera pack snippets - Number strip. 

I stamped Mr Rabbit on Watercolor paper with Black soot Archival ink and colored him with Distress inks. Fuzzy cut and then inked the edges with Scorched timber DI. Adhered him to the card with 3D foam for dimension. I stamped his bow tie twice and cut it out, colored and adhered with 3D foam. I used Glossy accent in his eye. 

I cut a Star border with Sizzix 3D Impresslits Star border trim from Mixed media heavystock, inked with Scorched timber and Uncharted mariner. Adhered to the card with 3D foam and two Mini fasteners. 

I used a Type clip with the letter “J”, and fastened it with a Mini fastener. My Father’s name starts with the letter J. 

Here you can also see one of the small Ephemera pieces mentioned above. 

I cut a piece of dark blue cardstock to use behind the background as a mat, then I made a card blank from Kraftstock. I inked the edges on the Kraftstock with Scorched timber DI. 

I will try this card over at Simon Says Stamp - 4 Legged friends.

Thank you very much for visiting my blog, 

/Susanne

ATC cards

Hello and welcome, 

Today I want to share some ATC cards. 
I haven’t made many ATC’s in my life but I went to a craft crop in my hometown this spring, and there was a couple of challenges there to attend. So I went for an ATC challenge. We should make four cards and in bright colors. So I took my Tim Holtz CMS479 Abstract flowers stamps and started.

I started with the backgrounds cut from Watercolor cardstock. I inked my craft mat with some Distress inks and Distress Oxides and then sprayed some water, dipped the cards. Dried with my heat tool. Repeated until happy. Then I splattered som black acrylic paint. I draw a line with a black Posca pen around the edges and inked the edges with Black soot DI. 

I also stamped the background with CMS396 Field notes and CMS448 Eccentric with Black soot Archival ink.

I used some Crackle glaze and THS174 stencil, Berry leaves. 

All flowers are stamped on Watercolor paper with Embossing ink, then added black embossing powder and colored with Distress inks. Fuzzy cut. When I fuzzy cut I cut off all the small petals on the top of the flowers. Then stamped the flowers with Archival ink on the background. Then I added the Fuzzy cut flowers above and with 3D foam for dimension. 

I cut some small rectangles from Black cardstock and stamped “Hello” with Distress embossing ink, then used white embossing powder. The small “signs” is fastened with mini fasteners. 

I will try these cards in a challenge over at Simon Says stamp Monday challenge -Lots of layers.

Thank you very much for visiting my blog, 

/Susanne

Birthday card for a collegue

Hello and welcome,  

Today I want to share a card that I have made for a colleague who have turned 30. He own’s a Harley Davidson motorcycle so I wanted it to be a male card with some details to pick up the HD theme.

I have used Tim’s products for this card.

The background is Mixed media heavystock, 662717 Foundry 3D embossing folder. Inked with Distress inks. 

Grit paste translucent and Distress crayons around the edges of the background. Alcohol inked die cut gears.

“30” is cut from 665367 Countdown, Ideaology cardstock. 

Here I have used my Bigz die 664168 Voltage, Distress grit paste translucent and Distress crayons. Metallic Kraftstock. CMS373 The professor. Distress Watercolor pencils. 

665924 Alphanumeric Theory for the “HD”. The tyre stamp is an old set, CMS128 Roadtrip, which I have embossed with black embossing powder. 

The tag is cut from 657188 Tiny tags and tabs. 665754 Industrious 3D embossing folder. Gears from 666603 Vault watch gears, metallic Kraftstock and Alcohol ink in Mushroom.

The bolts are made from cardboard and metallic Kraftstock, 664185 Steampunk parts. Distress crayons.

A piece of rustic wire in the tag hole. 

Acrylic paint for small splatters on the card.

Cardboard from an old shoebox behind the card. Than black cardstock as a cardbase. 

I will try this card over at Simon Says stamp Monday challenge - Masculine. 

Thank you very much for visiting my blog, 

/Susanne 

Mother’s day card

Hello and welcome, 

Today I will share the card I made for my Dear Mother for Mother’s day last Sunday.

I used the wreath die from Tim Holtz as the main focus.

I started with a piece of Watercolor cardstock, inked some Distress ink Pumice stone on my craftmat, spritzed some water and dippen the paper. Dried with my heat tool. Repeated until happy. 

I used Tim’s heart stencil and Distress Texture paste matte. Let dry.  Then I sprayed some Distress spray stain Uncharted mariner and some water and dried again with my heat tool. I stamped some text with CMS328 Entomology stamp set and Archival ink in Ground espresso. Inked the edges with Distress ink Scorshed timber and stitched with my sewing machine around the edges. I also splattered a little bit with Distress spray stain  Uncharted mariner. 

I diecut the pieces for the wreath from 666563 Vault funky floral wreath and Watercolor cardstock. Then inked the pieces with different colors of Distress ink. I also took a piece of a Ideaology Stencil card and dipped into some Distress ink Uncharted mariner and inked the edges with Scorshed timber. Used a Ideaology Tiny clip in the top left corner as decoration . I cut the heart with 666567 Vault rosettes from Watercolor cardstock. Inked it in Uncharted mariner and spritzed som water and dried with a heat tool. I also used a sewing thread and wired it around the heart. I think that gives such a nice effect. 

I cut a base from dark brown cardstock and used 3D foam for dimension. 

Here you can see the thread on the heart better. You can also see that I added two small pieces of Ephemera Snippets Curator. I sanded a little on the pieces and inked the edges before I glued them to the card. I stamped some postage stamps and numbers from CMS396 Field notes with Ground espresso Archival ink. 

I made a cardbase from Kraft heavystock, inked the edges with Scorched timber DI. 3D foam again for dimension. 

I will try this card over at Simon says stamp Monday challenge - Lots of texture. 

Thank you for visiting my blog, 

/Susanne 

Birthday card for a friend

Hello and welcome, 

Today I want to show a card that I made for a friend’s birthday. 

A while ago I mentioned that I used the same background technique’s for three cards. This is the second card. I have used Tim’s products for this card. 

I made the star with Tim’s Vault rosettes 666567 die set from Sizzix. I love this star die! 🌟 For the background have I used the THS174 stencil, Texture paste opaque and platinum embossing powder.

The wreath is from Vault funky floral wreath, 666563. 

I used Distress spray stains (Uncharted mariner and Rusty hinge) on Watercolor cardstock on the background. I also spritzed some drops of Distress Oxide spray Speckled egg on the background. 

I colored the paperdolls with Distress crayons. 

I adhered the card to a piece of sanded metallic Kraftstock.

I finished off the card with a Quote chip label and a piece of ephemera snippets number strip. 

I will try this card in a challenge over at Simon says stamp Monday challenge - Feminine.

Thank you very much for visiting my blog, 

/Susanne

Celebrare 60 years of engagement

Hello and welcome, 

Today I want to share a card that I made for my Dear parents who have been engaged for 60 years the last of April. 🎉🌟❤️. Next year they celebrate 60 years of marriage).

I have used Tim Holtz products for this card.

I started to cut a piece of designpaper from an old cherished stack - French industrial. I used some crackle paste through the THS017 Hearts layering stencil. Let air dry. Then I scribbled a Distress watercolor pencil on the hearts, then used a wet paintbrush to spread the color in to the cracks. 

Then I used texture paste opaque through the THS033 Valentine stencil and quickly added some Walnut stain embossing glaze on the paste. Let air dry, when dry I used my embossing tool and heated the glaze. 

I also stamped some images from the CMS396 Field notes stamps with Scorched timber DI. Inked the edges with the same DI and stitched around the edges with my sewing machine. 

Time for the rosette 666567, I cut the pieces from the same paper as mentioned above. Inked the edges with Scorched timber DI. For the circle in the middle of the rosette I used CMS460 Tiny prints in the background and the small flowers are from Field notes. Then I stamped the quote from CMS463 Quote notes with Scorched timber DI and added clear embossing powder. Heated. Inked the edges on the circle. 

Then I cut 60 from Ideaology Kraftstock, inked the edges. I adhered the 60 with 3D foam.

Before adhereing the rosette I glued some Mica tiles behind the rosette. Added two Hex fasteners, a big in the lower left corner and a small one in the upper right corner.

Here you can see the shine from the Mica tiles. 

I cut a piece of Ideaology Kraftstock, sanded and inked the edges and adhered the card to. Then I made a card blank from a piece of older sanded Ideaology Kraftstock. 3D foam between all layers for dimension. After I took these photos above, I decided to add some small hearts.

I cut three small hearts from sanded Ideaology Kraftstock with 660953 Crazy things, and added to my card.

Thank you for visiting my blog, 

/Susanne

 

Thanks

Hello and welcome, 

Today I will show a card made with Tim’s new flower stamps. I made this card for a friend who surprised me at work last week and bought me lunch. 

I started with the background, a piece of Watercolor cardstock. I used some Distress spray stains (spiced marmalade and crackling campfire) and some Distress Oxide sprays (Spiced marmalade, Crackling campfire and Picked raspberry ). Added some water, dried and repeated to build up some layers. Dried between the layers with my heat tool. 

I stamped some different stamps on the background with Archival ink, Black soot. Stamp set that I used: CMS412 Examination (the dots). CMS478 Mr Rabbit (the “grid”). CMS479 Abstract florals (“Thanks” and I also stamped the roses (the pistils, so I don’t have to fuzzy cut them). 

It is hard to see on the photo, but I used another stamp from CMS412 in the lower right corner. Then I used crackle glaze through THS183 Deco feather stencil. Let air dry. I inked the edges with Black soot DI and stitched around the edges with my sewing machine. 

I inked the flower stamps from CMS479 Abstract florals with Black soot Archival ink and stamped them on Watercolor paper. I colored them with Distress watercolor pencils, fuzzy cut and inked the edges with Black soot DI. Then I aligned them to the already stamped flowers and glued them to the background. 

I found two pieces of Ideaology Ephemera snippets Curator in matching colors and fastened them with a mini paper clip.

I cut a piece of pink cardstock and inked the edges with Scorched timber DI, then made a lilac cardblank, inked the edges with the same DI. I used 3D foam between all layers. 

I will try this card over at Simon says stamp Monday challenge - Make your own background. 

Thank you very much for visiting today, 

/Susanne