Blogg

Blogg

onsdag 14 juni 2023

To the moon and back

Hello and welcome, 

This is a card which I made for my lovely husband on his birthday.

I have used Tim Holtz products. 


I started with the background, a piece of white heavystock. Inked my craft mat with Distress ink Uncharted mariner, spritzed with water and then dipped the background in the ink. I repeated and dried between layers with my heat tool. When satisfied I used the Bold text #2 die from Sizzix (665925)


I inked the edges with Frayed burlap DI and stitched with my sewing machine. Then I used the stencil from Stamptember 2019 set and put Crackle paste through it. Before I let it dry I used embossing powder in Platinum. Let the paste dry completely and then heat with heat tool.


I used the same bold text die on an DI inked piece of Cracked leather cardstock. Inked the edges on all letters with Frayed burlap DI and glued them in place on the background. (I glued a piece of copy paper behind the background). 

The moon is cut from Otis (665998) white heavystock, and inked the same way as the background. The heart is cut from (660953), Crazy things. I cut the heart from White heavystock 5 times and glued them together, then drilled a hole with my Dremel tool. I also drilled a hole in Otis. 

I used a steelwire to attached the heart. 


I cut a piece of yellow Kraft stock, sanded and inked the edges with DI Ground espresso and mounted with 3D foam behind the background. Finally I cut a piece of Blackout Kraft stock, sanded and made a card blank. I used 3D foam between that layer as well. 

Thank you very much for visiting my blog, 

/Susanne


Inga kommentarer:

Skicka en kommentar